Stainless steel floor-standing integral hand sink. Touchless infrarred operated. Not mobile. Mixed hot and cold water.

The freestanding stainless steel hand wash basin with electronic control combines a large round bowl, a touch-free sensor tap and a splashback already fitted with its dispensers: a complete hand-washing station, ready to stand against a wall.

Key features

• Material: stainless steel with a scotch-brite satin finish; bowl and pedestal form a fully welded assembly.
• Control: electronic sensor tap — the water starts as soon as hands come close, with no contact with the unit.
• Bowl: round, with a drip-stop rim, fed by a 360° swivelling stainless steel gooseneck spout.
• Built-in equipment: splashback with soap dispenser and paper towel dispenser, waste bin housed in the pedestal.
• Installation: floor-standing against a wall, connected to the water supply and to a waste outlet. Removable front panel for access to the connections; recessed lower rear section to clear the sanitary skirting. Splashback supplied unassembled, to be fitted to the unit on site.
• Safety: pedestal narrower than the top, keeping the walkway clear and feet away from the edge.

Recommended use

Designed for hand-washing points subject to strict hygiene requirements, wherever contact with the tap must be avoided.

• Healthcare, clinics and laboratories
• Food industry and processing plants
• Professional kitchens, catering and public institutions
• Supermarkets and food retail

Additional benefits

• Enhanced hygiene: touch-free operation removes the most common point of recontamination, the tap itself.
• Complete station: soap, paper towels and waste bin are already built in — no wall accessories to add.
• Durability: welded one-piece body, no rivets, unaffected by corrosion and impact.
• Easy maintenance: non-porous surface and open angles, cleaned in a single pass.

Investing in this freestanding hand wash basin means a sturdy, genuinely hygienic solution that fits visually into any professional environment.

Restrictions and warnings

• Not a self-contained unit: it has no tank and no pump, and must be connected to the mains water supply and to a waste outlet.
• Intended exclusively for hand washing.

Technical specifications

• Overall dimensions: 450 mm (length) × 450 mm (width) × 1250 mm (height).
• Bowl: Ø 390 mm, 150 mm deep.
• Flow rate: 8 l/min.
• Material: stainless steel, scotch-brite satin finish.
• Water type: hot, cold or pre-mixed, with a non-return mixing valve for temperature setting.
• Power supply: 2 CR123 batteries (not included).
• Net weight: 15.2 kg.
• Assembly: splashback supplied unassembled, fitted to the unit during installation.
• Packaging: 1 unit per box (470 × 470 × 900 mm).
• Warranty: 2 years.