Stainless steel integral floor-standing hand sink. Foot operated. Not mobile. Mixed hot and cold water.

The all-in-one freestanding stainless steel hand wash basin with foot control arrives complete: bowl, splashback, soap dispenser, paper towel dispenser and built-in waste bin. The floor push button releases the water without hands touching the unit.

Key features

• Material: stainless steel, brushed satin finish; bowl and pedestal form a fully welded assembly.
• Control: foot push button — no hand contact with the tap.
• Bowl: round, with a drip-stop rim that contains splashes.
• Built-in equipment: splashback with soap dispenser and paper towel dispenser, waste bin housed in the pedestal with a strap to hold the bin liner.
• Water supply: 360° swivelling stainless steel gooseneck spout, fed by a non-return mixing valve that sets the temperature.
• Installation: floor-standing against a wall, connected to the water supply and to a waste outlet. Removable front panel for access to the connections; recessed lower rear section to clear the sanitary skirting.
• Safety: pedestal narrower than the top, keeping the walkway clear and feet away from the edge.

Recommended use

Designed for hand-washing points subject to strict hygiene requirements, wherever contact with the tap must be avoided.

• Healthcare, clinics and laboratories
• Food industry and processing plants
• Professional kitchens, catering and public institutions
• Supermarkets and food retail

Additional benefits

• Enhanced hygiene: foot operation removes the most common point of recontamination, the tap itself.
• Complete station: soap, paper towels and waste bin are already built in — no wall accessories to add.
• No power supply needed: purely mechanical control, nothing to power or replace.
• Durability: welded one-piece body, no rivets, unaffected by corrosion and impact.
• Easy maintenance: non-porous surface and open angles, cleaned in a single pass.

Investing in this freestanding hand wash basin means a sturdy, genuinely hygienic solution that fits visually into any professional environment.

Restrictions and warnings

• Not a self-contained unit: it has no tank and no pump, and must be connected to the mains water supply and to a waste outlet. It is not portable in service.
• Intended exclusively for hand washing.

Technical specifications

• Overall dimensions: 450 mm (length) × 450 mm (width) × 1250 mm (height).
• Bowl: Ø 390 mm, 150 mm deep.
• Flow rate: 9 l/min.
• Material: stainless steel, brushed satin finish.
• Water type: hot, cold or pre-mixed, with a non-return mixing valve for temperature setting.
• Splashback, soap dispenser and paper towel dispenser: included.
• Built-in waste bin, with a strap to hold the bin liner.
• Net weight: 14.2 kg.
• Warranty: 2 years.